Front Mount Trailer Hitch Installation - 2011 GMC Sierra- Video
Today on our 2011 GMC Sierra we're going to take a look at and also show you how to install the Curt Custom Fit Front Mount Trailer Hitch Receiver with the 2" by 2" opening. Part number is 31322. Here's a good look at our hitch once we get it installed, as you can see you're not losing really anything here. Our ground clearance is going to remain just about the same, the hitch is going to remain just about completely hidden up here behind our bumper. Great thing about the install process, it uses all the factory mounting locations so we don't have to drill any holes, you don't have to make any modifications to our truck. It's going to leave us with our 2" by 2" receiver tube opening. These are going to work out really, really well for front mounted winches, for your snow plows, some people will put a cargo carrier on the front, a bike rack on the front, if they need to maximize their carrying capacity, so it's going to be pretty versatile. more
12/13/2016 4:16:52 PM
Front Mount Trailer Hitch Installation - 2008 GMC Yukon - Curt- Video
Today on our 2008 GMC Yukon, we're going to take a look at and then showing you how to install the Curt Front Mount Trailer Hitch Receiver. This is a custom fit, offering a 2-inch by 2-inch opening. It's part number is C31012. This is going to be a great way to get a hitch on the front of the vehicle to help us with certain tasks that we need to accomplish without adding or detracting too much from the look of our vehicle. As you can see, our main crosstube and everything is going to be hidden back behind this lower fascia panel. We had to trim that out a little bit, but that was a really minor thing to do. Looks like below that, our hitch is going to come down about 2 and 3/8 of an inch, so just keep that in mind. If clearance is an issue with you getting in and out of the driveway or something, might not be something that you want. We've got that nice clean, flush look on the end here. more
10/3/2016 10:04:44 AM
Front Mount Trailer Hitch Installation - 2013 GMC Sierra- Video
Today on our 2013 GMC Sierra we're going to take a look at and show you how to install the Kirk custom-fit front-mount trailer hitch receiver. This offers a 2-inch opening. It's part number is C31023. Here's what our hitch looks like once we get it installed here on the front of the Sierra, really nice clean-looking hitch, beefs up the look of the front end a little bit. It doesn't protrude out pass the front edge of our bumper. That straight line would be about there, so we're going have maybe an inch and a half, 2 inches because it's tucked back in but it sticks out far enough that we've got plenty of access room for our pin hole. We've used all existing bolts, some to hold the tow hooks in, some for the bumper. more
7/23/2015 2:06:06 PM
Front Mount Trailer Hitch Installation - 2015 GMC Sierra 3500 - Curt- Video
Today in our 2015 GMC Sierra 3500, we're going to be installing the Curt Front Mounted Trailer Hitch, Part Number C31071. Our hitch has a 500 pound tongue weight and a 5,000 pound towing weight. With a 9,000 pound straight line pulling capacity. It's a fully welded, steel construction with a square cross tube. It's designed to hook up to the side plates which are secured directly to the frame. Here are a couple measurements that will assist you with selecting accessories such a ball mount, winch mount, or a snow plow. From the center of the hitch pin hole to the other most edge of the front bumper is 7-3/4 inches. more
2/20/2015 3:59:09 AM
Front Mount Trailer Hitch Installation - 2011 GMC Sierra C31023- Video
12/28/2012 9:18:16 AM
Filter Videos
Filter Videos
